• Key feature overview for CasterJet spray nozzles:
  • Major advancement in secondary cooling in the caster.
  • Patented design principle for mixing air and water provides superior cooling results for steel surfaces, using up to 25% less air than traditional designs.
  • See Also:

A Guide to Spray Technology for Steel Mills

• Key feature overview for AA218AC/AA214 DescaleJet spray nozzles:
  • Several models of self-aligning DescaleJet nozzles are available for use in hot strip mills. Where spray heights of 6" to 12" (152 to 305 mm) are required our 218 model fits the bill. Use the 214 model for heights of 2" to 6" and lower capacities.
  • Used after roughing stands, deliver a flat spray pattern with up to 50% more impact than conventional nozzles.
  • Internal vane stabilizes spray and enables higher impact to be achieved.
  • Stainless steel body and spray tip holder provide heavy outer protection from splash-back wear and flying debris.
  • See Also:

A Guide to Spray Technology for Steel Mills

• Key feature overview for 50000 DescaleJet spray nozzles:
  • Ideal for use in applications where impact is key and flow needs to be kept at a minimum.
  • Construction includes tungsten carbide insert for longer wear life.
  • Compact one piece body design with 1/4" NPT inlet connections.
  • See Also:

Data Sheets 50000, 50000-1

• Key feature overview for Dovetail spray nozzles (49805, 50870, 18897):
  • Dovetail groove feature provides repeatable pattern positions for improved spraying accuracy.
  • Self-aligning, interchangeable spray tip slides into the groove with the spray pattern offset by 15°.
  • Secured into position by the nozzle cap.
  • Spray tip available in tungsten carbide, hardened stainless steel, stainless steel and brass.
  • See Also:

A Guide to Spray Technology for Steel Mills

Data Sheets 49805, 50870, 18897-1, -2