G6 - Air Atomizing, Air-Actuated, JJAU Series
Features and Benefits
- Compact, precision nozzle.
- Internal air cylinder for controlled on/off operation up to 180 cycles per minute.
- The on/off cycle interrupts only the liquid portion of the spray.
- Liquid flow to the nozzle may be by siphon, gravity-feed or pressure-feed.
- Stainless steel return stroke spring results in instantaneous shut-off and long life.
- Air operated cylinder is designed for instant retraction of shut-off needle to start spraying.
- Available in a wide variety of spray set-ups that allow a variety of capacities and spray patterns.
-
Key feature overview for
1/8JJAU:
- Compact with the operating features of the JAU series – designed for use in small areas.
- A minimum pressure of 30 psi (2 bar) for air cylinder operation and a maximum liquid pressure of 125 psi (9 bar) recommended.
- Incorporates Drip Free™ design set-ups for complete shut-off.
-
Key feature overview for
16883-1/8JJAU:
- Compact with a single inlet for both atomizing and cylinder air.
- Designed to spray at a 45° angle to the nozzle inlet axis.
-
Key feature overview for
38499-1/8JJAU:
- Compact with the operating features of the JJAU series.
- Uses all 1/4J spray set-ups for ultimate adaptability.
- Two cylinder air connections allow ganging units and simplify hookups.
- A minimum of 30 psi (2 bar) for air cylinder operation and a maximum liquid pressure of 125 psi (9 bar) recommended.
-
Key feature overview for extension
17690-1/8JJAU:
- Spray set-up extension attached to the stainless steel nozzle assembly.
- Extensions are available in 3", 6", 9" and 12" (8, 15, 23 and 30 cm) lengths. Other lengths available by request.
1/8JJAU
1/8" NPT or BSPT (F) air and
liquid inlet connection
16883-1/8JJAU
1/8" NPT or BSPT (F) air
and liquid inlet connection
with 45° adapter
38499-1/8JJAU
1/8" NPT or BSPT (F) air and
liquid inlet connection
Extension 17690-1/8JJAU
3" to 12" (8 cm to 30 cm) lengths
