G3 - Air Atomizing, Air-Actuated, JAU Series
Features and Benefits
- Internal air cylinder for controlled on/off operation up to 180 cycles per minute.
- On/off cycle interrupts only the liquid portion of the spray. (Liquid flow to the nozzle may be by siphon, gravity-feed or pressure-feed.)
- Available in a wide variety of spray set-ups with unique Drip Free™ design for a complete selection of capacities and spray patterns.
-
Key feature overview for
1/4JAU:
- Used with smaller capacity fluid caps.
- 10880-1/4JAU is specified for use with spray set-ups containing fluid cap 80150DF or 100150.
-
Key feature overview for
1/4JAUMCO:
- Index metering adjustment.
- Precise liquid flow metering. Control percentage of total flow in 5% increments from zero to 100%.
- Ideal for manifold situations where adjustments are required on individual nozzles.
- 63003 conversion kit converts existing 1/4JAU nozzles to metering versions.
-
Key feature overview for
6218-1/4JAU:
- Single air line used both for spray atomization and for operation of the air cylinder.
- Air line is regulated at the desired on/off cycle time causing simultaneous flow of atomizing air and liquid.
- Operates up to 180 cycles per minute and requires a minimum air pressure of 30 psi (2 bar).
-
Key feature overview for
6083-1/4JAU:
- Auxiliary shut-off assembly allows temporary liquid shut-off of individual nozzles in a system.
- Compact, precision nozzle has the unique Drip Free design and all the same operating features of the 6218-1/4JAU.
-
Key feature overview for
7310-1/4JAU:
- Knurled head screw control permits manual nozzle shut-off without disturbing operation of other nozzles on a manifold.
- Shares the same overall Drip Free design and operating features with the 1/4JAU.
-
Key feature overview for
1/4JAUCO:
- Clean-out needle which cleans the fluid orifice with each on/off cycle of the nozzle.
-
Key feature overview for
1/4JAUPM:
- Designed to meet special mounting applications and offers all the tested features and choice of Drip Free set-ups as the 1/4JAU spray nozzle.
- For easy removal or replacement, the nozzle body is attached to the mounting plate by a single nut.
- For quick and easy service of the nozzle without disturbing air and liquid line connections, all inlets are at the rear of the mounting plate.
-
Key feature overview for
1/4JAUPMCO:
- Combines the features of both the nozzle body held in a mounting plate and a clean-out needle extension.
-
Key feature overview for
6218-1/4JAUPM:
- Single air line used for spray atomization and for operation of the air cylinder.
- For easy removal or replacement, the nozzle body is attached to the mounting plate by a single nut.
- For quick and easy service of the nozzle without disturbing air and liquid line connections, all inlets are at the rear of the mounting plate.
-
Key feature overview for
19330-1/4JAUPM:
- Set the precise adjustment of spray atomization with the regulating screw and then lock in the setting with the hex locknut.
- In addition to infinite adjustability, offers the same choice of Drip Free spray set-ups as the 1/4JAU.
- For easy removal or replacement, the nozzle body is attached to the mounting plate by a single nut.
- For quick and easy service of the nozzle without disturbing air and liquid line connections, all inlets are at the rear of the mounting plate.
-
Key feature overview for mounting
kits:
- Constructed of stainless steel with 1/2" (13 mm) diameter mounting holes.
Split-eyelet connectors with 38180 swivel union to
simplify nozzle installation
