F61 - Air Atomizing Accessories
Features and Benefits
- 22140 pressure tank assembly meets ASME® Boiler and
Pressure Vessel Code requirements and OSHA safety
regulations.
- Constructed of 304 Stainless Steel.
- Assembly includes a pressure regulator with gauge, ASME coded pressure relief valve, air bleed valve and plug valves for air inlet and liquid outlet.
- Tanks are available in 1, 2, 5 and 10 gallon (3.8, 7.6, 18.9 and 38 liter) capacities.
- The air inlet and liquid outlet have 1/4" NPT (F) connections.
- The maximum working pressure is 140 psi at 100°F (9.5 bar at 38°C).
- The 22140 features brass fittings and an EPR lid seal.
- 38180 split-eyelet swivel union simplifies
installation and maintenance of air atomizing nozzles
and spray guns.
- Connector design reduces costs by eliminating cutting, threading, welding and brazing operations and adjustment of fittings, unions and nipples.
- Recommended pressure is up to 250 psi (17 bar) for liquid and air lines.
- Fits 1/2", 3/4" or 1" pipe or similar O.D. tube. 1/4" NPT or BSPT (M) outlet pipe connections.
- Nickel-plated brass with zinc-plated pipe clamps or all stainless steel construction.
- 39273, 39275 level switch kit indicates a low
liquid level condition inside the pressure tank.
- Use standard 39273 level switch with 5 and 10 gallon (18 and 38 liter) pressure tank assemblies with external 1/4" NPT (F) threads.
- Use 39275 level switch with 1 and 2 gallon (4 and 8 liter) pressure tank assemblies with external 1/4" NPT (F) threads.
- Features a U.L. listed float switch, quick disconnect and 12' (3 m) PVC jacketed cable.
- Available in brass with Buna-N float or all stainless steel.
- 39272 tank heater bands provide anywhere from 6°F
to 60°F (3°C to 33°C) heat gain depending upon the tank
size and number of bands used.
- Silicone rubber construction with fiberglass mesh reinforcement for added strength, flexibility, and corrosion resistance.
- Features quick-release band clasp and built-in thermostat for temperature control.
- Two sizes fit 9" and 12" (288.6 and 304.8 mm) diameter tanks.
- 38673 push-in tube fittings provide fast and easy
hook-up of air atomizing nozzles.
- Durable nickel-plated brass construction includes Buna-N O-ring.
- Select from six configurations with 1/8", 1/4" or 3/8" NPT (M) connections for 1/4", 3/8" and 1/2" O.D. tubing.
- 45592 ferrule-type tube fittings are intended for
use when operating at higher pressures.
- The 316 Stainless Steel is of durable construction and can be easily taken apart for cleaning.
- Six configurations available with 1/8", 1/4" or 3/8" NPT connections for 1/4", 3/8" and 1/2" O.D. tubing.
- 38691 and 38692 strong, semi-rigid nylon tubes
designed for use with 38673 fittings.
- Abrasion resistant and dimensionally stable tubing available in 12', 25' and 50' (3.6 m, 7.5 m and 15 m) lengths.
- Maximum working pressure is 250 psi (17 bar) at –40°F to +70°F (–40°C to +20°C).
- 38691 has 1/4" O.D.
- 38692 has 3/8" O.D.
