B1

Enviar esta página por mail

Página anterior Siguiente página

F60 - Humidification System Components

Features and Benefits

2335-SE pipe assembly consists of straight and formed tubing with fittings, globe valve and split-eyelet connectors.
- Not assembled.
11438-85 humidistat will respond to humidity levels in the range of 20% to 95% RH.
- Maximum operating temperature 125°F (52°C). 24V DC; 110V. Overall height 6" (15 cm).
11438-95 switching relay has built-in transformer that supplies low-voltage current for humidistat circuit.
- 2-wire 24V control, 115V AC. Maximum temperature 115°F (46°C).
55089 electric humidistat quick relative humidity LCD readouts from 1% to 99% with repeatability of ±5%.
- Operating temperature range 32°F to 160°F (0°C to 71°C).
- 24V (DC or AC).
45604 float valve used in 45600 float box to shut off inlet flow at a preset water level.
- Made of ABS plastic, 304 Stainless Steel, polypropylene with fiber washers and a brass nut.
55400 valve package is easy to install and use – simply connect to existing air and fluid lines.
- The NEMA type 4 panel is completely sealed to eliminate moisture damage to components.
- Safety feature ensures there is no product damage due to unintentional water release.
- Stainless steel components available for use with deionized water.
- Separate atomizing and cylinder air lines with adjustable delay time assures liquid atomization.
2202 pipe hanger for proper spacing between air and liquid lines. Sizes fit 1/2" piping.
- Hanger is held by threaded rod and nuts (not included) for vertical adjustment.
- Made of cast aluminum. 4" (10 cm) spacing.
- Use with 2335-SE spray pipe assembly.