B1

D17 - UniJet® Spray Nozzles, Standard Spray

Performance Data

*At the stated pressure in bar.
Body Inlet Conn. (in.)	Capacity Size	Inlet Openings (mm)	Orifice Dia. Nom. (mm)	Capacity (liters per hour)*									Spray Angle (°)*
Body Inlet Conn. (in.)	Capacity Size	Inlet Openings (mm)	Orifice Dia. Nom. (mm)	1.5	2	3	4	6	7	10	15	25	1.5	3
1/4	.60	One .30 x .25	.36	–	–	–	2.7	3.4	3.6	4.3	5.3	6.8	–	–
	1	One .41 x .38	.51	–	3.2	3.9	4.6	5.6	6.0	7.2	8.8	11.4	–	54
	1.25	One .51 x .51	.56	–	4.0	4.9	5.7	7.0	7.5	9.0	11.0	14.2	–	59
	1.5	One .61 x .51	.61	–	4.8	5.9	6.8	8.4	9.0	10.8	13.2	17.1	–	63
	2	One .71 x .61	.71	5.6	6.4	7.9	9.1	11.2	12.1	14.4	17.7	23	40	68
	2.5	One .76 x .74	.79	7.0	8.1	9.9	11.4	14.0	15.1	18.0	22	28	48	70
	3	One .91 x .86	.86	8.4	9.7	11.8	13.7	16.8	18.1	22	26	34	57	72
	4	One 1.0 x .86	1.0	11.2	12.9	15.8	18.2	22	24	29	35	46	61	73
	5	Two .81 x .81	1.1	14.0	16.1	19.7	23	28	30	36	44	57	63	73
	6	Two 1.0 x .81	1.2	16.8	19.3	24	27	34	36	43	53	68	65	74
	8	Two 1.0 x .91	1.4	22	26	32	36	45	48	58	71	91	66	74
	10	Two 1.3 x .76	1.5	28	32	39	46	56	60	72	88	114	68	75
	12	Two 1.3 x .86	1.7	34	39	47	55	67	72	86	106	137	69	76
	14	Two 1.4 x .86	1.8	39	45	55	64	78	84	101	124	160	70	76
	18	Two 1.5 x .79	2.0	50	58	71	82	101	109	130	159	205	71	77
	22	Two 1.7 x .76	2.2	61	71	87	100	123	133	159	194	251	71	78
	26	Two 1.7 x .76	2.4	73	84	103	119	145	157	187	230	296	72	78
Spray angle of all above tips is 80° at 100 psi (6.9 bar). Other body types may be available. Contact representative for further information.

Dimensions and Weights

Standard	Nozzle Type	Length (mm)	Hex. (mm)	Net Weight (kg)
	T+TX	47.5	20.6	.07
	TT+TX	49.5	20.6	.06
	T+D	36.5	20.6	.07
	TT+D	38	20.6	.06
Based on largest/heaviest version of each type.

UniJet nozzles with TX tips used in cooling section of industrial furnace.