H12 - Spray Gun Extensions
Specifications
| Gun Extension | Extension No. |
Maximum Pressure (psi) |
Inlet Conn. |
Outlet Conn. |
Extension Material |
Special Features |
 |
9004-SS | 4000 | 11/16"–16 UniJet® THD |
11/16"–16 UniJet THD |
Stainless steel | – |
 |
11806 | 4000 | 11/16"–16 UniJet THD 1/4" NPS (M) liquid recirculating |
11/16"–16 UniJet THD 1/4" NPS (M) liquid recirculating |
Brass | Stainless steel only available in 8" length. |
 |
15250 | 3000 | 3/8" NPT or BSPT (M) |
11/16"–16 UniJet THD |
Stainless steel or zinc-plated steel |
Adjustable hand grip. |
 |
20400 | 3000 | 1/4" NPT or BSPT (M) |
1/4" NPT or BSPT (M) or 1/8" NPT or BSPT (F) |
Stainless steel or zinc-plated steel |
– |
 |
13781S | 2000 | 11/16"–16 UniJet THD |
– | Mild steel | Usually supplied with 7890 inlet cap and 13783 hollow cone spray tip (order cap and tip separately). Refer to Data Sheet 13775. |
 |
9702S | 2000 | 11/16"–16 UniJet THD |
– | Mild steel | Usually supplied with 7890 inlet cap and a tungsten carbide spray tip (order cap and tip separately). Refer to Data Sheet 9702-1. |
 |
9702A | 2000 | 11/16"–16 UniJet THD |
– | Mild steel | Projects spray at 90° angle. |
 |
9702C | 2000 | 11/16"–16 UniJet THD |
– | Mild steel | Curved body. |
 |
15699 | 1000 | 11/16"–16 UniJet THD |
11/16"–16 UniJet THD |
Brass | Rubber insulated (48" length not rubber insulated). |
