B1

G9 - Air Atomizing, Air-Actuated, 10530 Series

Features and Benefits

Versatile and practical to meet a variety of liquid spray requirements.
Produces fine atomization by mixing air and liquid supplied at line pressures up to 125 psi (9 bar).
Self-contained air cylinder provides controlled on/off operation at any desired frequency up to 180 cycles per minute.
Completely separate nozzle body and air cylinder assemblies require minimum maintenance and nozzle cleaning is fast and easy.
For high temperature applications, Teflon® packing and gaskets in the nozzle withstand continuous use at temperatures up to 400°F (205°C). Air cylinder packing is recommended for temperatures up to 150°F (65°C).
Key feature overview for 10535-1/4J:
- Offers a wide range of capacities up to 72 gph (280 l/h) and a choice of round, wide angle round and flat spray patterns are available with either siphon or pressure Drip Free™ spray set-ups.
Key feature overview for 10536-1/2J:
- Offers a wide range of capacities up to 306 gph (1158 l/h) and a choice of round, wide angle round and flat spray patterns are available with either siphon or pressure Drip Free spray set-ups.
Key feature overview for 10537-1J:
- Offers a wide range of capacities up to 29 gpm (107 l/min) and a choice of round, wide angle round and flat spray patterns are available with either siphon or pressure Drip Free spray set-ups.

10535-1/4J

1/4" NPT or BSPT (F)

air/liquid inlet connection

1/8" NPT or BSPT

cylinder air connection

10536-1/2J

1/2" NPT or BSPT (F)

inlet connection

1/4" NPT or BSPT (F)

cylinder air connection

10537-1J

1" NPT or BSPT (F) inlet connection

Optimization Tips

For the fastest and most precise control of spray cycling and spray pressures possible, use the AutoJet® Spray Controllers with this automatic spray nozzle.
See page G2 for more optimization tips.

See Also

For 10535-1/4J, request Data Sheet 10535
For 10536-1/2J, request Data Sheet 10536
For 10537-1J, request Data Sheet 10537
Automatic air-actuated nozzles use the same set-ups as standard air atomizing nozzles. For performance data, see section F; 1/4J, 1/2J, 1J.

Materials

Material	Material Code	Nozzle Type
Material	Material Code	10535	10536	10537
Nozzle Bodies:
Nickel-plated Brass	(none)	•	•	•
303 Stainless Steel	SS	•	•	•
Spray Set-ups:
Nickel-plated Brass Air Cap and 303 Stainless Steel Fluid Cap	SSBR	•	•	•
303 Stainless Steel	SS	•	•	•
O-ring Material:
Viton®*	(none)
Teflon	TEF
FDA Viton	VIFDA
Buna-N	BU
Ethylene Propylene Rubber	EPR

*Viton is the standard O-ring material.

Ordering Info