B1

G19 - Hydraulic, Electrically-Actuated, 26AUH Series

Features and Benefits

Key feature overview for 26AUH:
- High speed, high-pressure, airless electric spray nozzle.
- Automatic spray nozzle for applications requiring an intermittent spray.
- The liquid pressure alone provides an atomized spray.
- The nozzle sprays up to 1000 cycles per minute.
- Faster version is also available which sprays up to 1500 cycles per minute.
- A removable fluid module contains all fluid handling parts and can be replaced without disturbing the mounting or electrical connections.
- Wetted parts are made of stainless steel or tungsten carbide for maximum corrosion resistance.
- Internal seal material is EPDM rubber. Other materials available on request.
Key feature overview for 26AUH-24200-2-1/2:
- Same as 26AUH with 2-1/2" (63.5 mm) extension for interior can coating.
- 22629 swivel nut branch tee (For 26AUH only. See page L34).
- 50935 mounting kit (For 10000AUH only.)

26AUH

Cycles/minute: 1000

Maximum pressure:

2000 psi (138 bar)

Capacity: 1.1 gpm (4.2 l/min)

24 VDC (1.65 A)

26AUH-24200-2-1/2

Cycles/minute: 1500

Maximum pressure:

2000 psi (138 bar)

Capacity: 1.1 gpm (4.2 l/min)

24 VDC (1.65 A)

Optimization Tips

For the fastest and most precise control of spray cycling and spray pressures possible, use the AutoJet® Spray Controllers with this automatic spray nozzle.
See page G2 for more optimization tips.

See Also

For 26AUH, request Data Sheets 26AUH and 26157-1
For 26AUH-24200-2-1/2, request Data Sheets 26AUH-24200-2-1/2 and 26156
26AUH Series nozzle assemblies work with most UniJet spray tips, see: Section B, Full Cone Spray Nozzles Section C, Flat Spray Nozzles Section D, Hollow Cone Spray Nozzles Section E, Fine Spray Nozzles

Ordering Info